Guides · At possession
At possession · 6 min readSnagging Checklist for a New Flat
Reviewed against MahaRERA rules · Informational, not legal advice
The short version: Snagging is your one chance to make the builder fix defects on their cost. Go room by room, photograph everything, and get a signed snag list before possession.
Room by room
1
Walls & ceilings
Cracks, damp patches, uneven plaster, paint finish.
2
Floors
Tiles level and firmly set — no hollow, chipped or cracked tiles.
3
Doors & windows
Alignment, smooth operation, locks, and weather seals.
4
Electrical
Every switch and socket, the distribution board, and proper earthing.
5
Plumbing
Taps, drainage, water pressure, and no leaks under sinks.
6
Bathrooms
Waterproofing, floor slope to the drain, and all fittings.
7
Kitchen
Platform, sink, and electrical/plumbing points as planned.
8
Balcony & railings
Railing height and safety, and balcony drainage.
9
Overall
Dimensions against the plan, and every agreed fitting present.
What to watch for
- Verbal “we'll fix it later” — get every snag on a signed list with a date.
Let a free tool do the work
Put this guide into action — Snagging & Handover is free and needs no login to try.
Open Snagging & HandoverRead next
This guide is general information to help you ask better questions — it is not legal advice, and it doesn't replace your own advocate or the official MahaRERA portal. Rules, rates and builder practices vary; always verify against the current MahaRERA record and your project's documents before acting.